Item/Model | HSJ-330 | ||||
Injection unit |
Screw Diameter | mm | 60 | 65 | 70 |
Screw L/D Ratio | L/D | 21.5 | 20 | 18.7 | |
Theoretical Shot Volume | cm3 | 876 | 1028 | 1192 | |
Injection Weight(PS) | g | 797 | 935 | 1085 | |
Injection Pressure | MPa | 200 | 170 | 147 | |
Injection Rate(PS) | g/s | 158 | 186 | 216 | |
Plasticizing Capacity | g/s | 29.2 | 34.3 | 45.4 | |
Screw Speed | rpm | 0-120 | |||
Clamping unit | Clamping Force | KN | 3300 | ||
Space Between Tie-Bars | mm | 620x620 | |||
Opening Stroke | mm | 600 | |||
Max. Mould Thickness | mm | 680 | |||
Min. Mould Thickness | mm | 280 | |||
Ejector Force | KN | 87 | |||
Ejector Stroke | mm | 160 | |||
Others | Motor Power | KW | 30 | ||
Heating Power | KW | 18.52 | |||
Oil Tank Volume | L | 550 | |||
Machine Weight | ton | 10.2 | |||
Machine Dimension | m | 6.6x1.55x3.1 | |||