Item/Model | HSJ-250 | ||||
Injection unit |
Screw Diameter | mm | 55 | 60 | 65 |
Screw L/D Ratio | L/D | 21.8 | 20 | 18.5 | |
Theoretical Shot Volume | cm3 | 594 | 706 | 829 | |
Injection Weight(PS) | g | 540 | 643 | 755 | |
Injection Pressure | MPa | 198 | 166 | 141.6 | |
Injection Rate(PS) | g/s | 136 | 163 | 191 | |
Plasticizing Capacity | g/s | 24.7 | 29.2 | 35.6 | |
Screw Speed | rpm | 0-120 | |||
Clamping unit | Clamping Force | KN | 2500 | ||
Space Between Tie-Bars | mm | 570x570 | |||
Opening Stroke | mm | 550 | |||
Max. Mould Thickness | mm | 600 | |||
Min. Mould Thickness | mm | 250 | |||
Ejector Force | KN | 70 | |||
Ejector Stroke | mm | 150 | |||
Others | Motor Power | KW | 22 | ||
Heating Power | KW | 15.6 | |||
Oil Tank Volume | L | 500 | |||
Machine Weight | ton | 8.0 | |||
Machine Dimension | m | 6.2x1.5x2 | |||