Item/Model | HSJ-180 | ||||
Injection unit |
Screw Diameter | mm | 45 | 50 | 55 |
Screw L/D Ratio | L/D | 22.2 | 20 | 18.2 | |
Theoretical Shot Volume | cm3 | 366 | 452 | 546 | |
Injection Weight(PS) | g | 333 | 410 | 497 | |
Injection Pressure | MPa | 210 | 170 | 140.7 | |
Injection Rate(PS) | g/s | 104 | 129 | 155 | |
Plasticizing Capacity | g/s | 14.6 | 19.7 | 25.8 | |
Screw Speed | rpm | 0-150 | |||
Clamping unit | Clamping Force | KN | 1800 | ||
Space Between Tie-Bars | mm | 460x460 | |||
Opening Stroke | mm | 460 | |||
Max. Mould Thickness | mm | 480 | |||
Min. Mould Thickness | mm | 200 | |||
Ejector Force | KN | 45 | |||
Ejector Stroke | mm | 130 | |||
Others | Motor Power | KW | 18.5 | ||
Heating Power | KW | 11.27 | |||
Oil Tank Volume | L | 350 | |||
Machine Weight | ton | 5 | |||
Machine Dimension | m | 5x1.2x1.8 | |||